Differences

This shows you the differences between two versions of the page.

--- network:firmware:meshdesk [2026/05/15 09:40] – [Note on Warnings] system
+++ network:firmware:meshdesk [2026/06/10 14:42] (current) – system
@@ Line 69: / Line 69: @@
   * Check out the **openwrt-meshdesk** package from the Github repository.
 <code>
-#Do this in the working directory e.g. cd 25.12.2 (on the same level as the openwrt directory)
+#Do this in the working directory e.g. cd 25.12.3 (on the same level as the openwrt directory)
 git clone https://github.com/RADIUSdesk/openwrt-meshdesk.git openwrt-meshdesk
 </code>
@@ Line 76: / Line 76: @@
        - **files** - This is the overwrite structure that contains files to be overwritten during the build process.
        - **luci-app-meshdesk** - This is the Luci application that allows you to enable or disable centralized control of the device.
+===== Configure SSL for CoovaChilli =====
+  * You need to decode the cert and key files used by CoovaChilli and place them in the required folder.
+<code bash>
+#cd to the working directory
+base64 -d ./openwrt-meshdesk/ssl/k-b64.txt  > ./openwrt-meshdesk/MESHdesk/files/MESHdesk/captive_portals/key.pem
+base64 -d ./openwrt-meshdesk/ssl/c-b64.txt  > ./openwrt-meshdesk/MESHdesk/files/MESHdesk/captive_portals/cert.pem
+</code>
 ===== Copying the three components =====
@@ Line 94: / Line 102: @@
 </code>
-===== Configure SSL for CoovaChilli =====
-  * You need to decode the cert and key files used by CoovaChilli and place them in the required folder.
-<code bash>
-#cd to the working directory
-base64 -d ./openwrt-meshdesk/ssl/k-b64.txt  > ./openwrt-meshdesk/MESHdesk/files/MESHdesk/captive_portals/key.pem
-base64 -d ./openwrt-meshdesk/ssl/c-b64.txt  > ./openwrt-meshdesk/MESHdesk/files/MESHdesk/captive_portals/cert.pem
-</code>
 ===== Updating the available packages =====